Period buildings have stood the test of time; they have stood tall through wars; weather and the ever-evolving world round them. This timber framed property came off the worst though; when a supermarket delivery van reversed into it…

How do you sympathetically repair such damage?

Timber, traditionally, oak framed houses were the norm for house building in England and Wales up until the 17th century. The fascinating thing is that each region had its own characteristics, depending on the local material, social and economic resources available. Suffolk and Essex are particularly rich in timber framed houses and I could write lots more about the amazing craftsmanship and characteristics of this region. As you can tell timber buildings play a special part in our business and we are passionate about these properties we work on, but I digress…   

So back to our impact damage project: The impact had left “irreversible" damage and the first stage was to fit a new sole plate, which essentially is the foundation for the bones of the building. This is a craft in itself, as every measurement has to be correct; any inaccuracies would cause weakness to the existing frame, causing cataclysmic faults to the whole property.

Once the sole plate was in, we set about implementing the oak stud and beam, followed with a traditional wattle and daub. One of the most common infills, this can be recognised by the charming irregularity of bulging panels. (However, we can do this fairly level if required.)

The wattle is an arrangement of small timbers that form a matrix, which supports a mud-based daub. The daub was applied simultaneously from both sides in 'cats' (damp, workable balls) pressed into and around the wattle, to form a homogeneous mass.

Once the daub had hardened, we set about dampening it and applying lime plaster. The plaster was finished flush, but in some projects, it is continued across the panels and timbers alike. This would allow less important timbers to be concealed and only principal members to be shown. This plaster can be smooth trowelled, rough cast or even parged (incised and/or built up with a pattern or design); its a lovely material to work with.

All this effort is not just at obsessive attention to detail; these ancient techniques and materials ensure the timber can ‘breathe’, which will prevent damp and rot.

This was a satisfying repair, with a nice finish; one we hope will last until delivery vans are a thing of the past!